MedVision ad

shipwrecks, corrosion n conservation (1 Viewer)

Dumsum

has a large Member;
Joined
Aug 16, 2004
Messages
1,552
Location
Maroubra South
Gender
Male
HSC
2005
Think about what would happen if the nail was removed. Exactly the same thing to the magnesium dissolving and iron ions coming out of solution. .'. the magnesium has no influence on the nail, the nail has no influence on anything, and could thus potentially rust etc
 

thunderdax

I AM JESUS LOL!
Joined
Jan 28, 2005
Messages
278
Location
Newcastle
Gender
Male
HSC
2005
I'm not talking about the anode, I'm talking about the nail. How could the solution be the cathode? definition of an electrode is: A conducting terminal of a cell. The solution could never be an electrode.
 

AreYouAlright?

Actuarial Co-op 2006
Joined
Sep 16, 2004
Messages
133
Gender
Male
HSC
2005
thunderdax said:
I'm not talking about the anode, I'm talking about the nail. How could the solution be the cathode? definition of an electrode is: A conducting terminal of a cell. The solution could never be an electrode.
I suggest very candidly that you go back to the VERY FIRST module you studied in HSC Chemistry and look at your syllabus and read up about Metal displacement reactions, you can then come back and i'll happily discuss this further. :)
 

gogogadgetbrain

New Member
Joined
Oct 28, 2004
Messages
22
Gender
Undisclosed
HSC
2008
thunderdax said:
I'm not talking about the anode, I'm talking about the nail. How could the solution be the cathode? definition of an electrode is: A conducting terminal of a cell. The solution could never be an electrode.
dude. look up the definition of an electrode and realise there are non in this particular reaction
 

Abtari

Member
Joined
Oct 6, 2004
Messages
604
Gender
Male
HSC
2005
yea, as stated earlier in my post, it would probably be wrong to say that iron deposits on the iron nail, rather it would do so at the 'bottom of the beaker' due to sheer force of newton's gravity, nothing else...

u would lose a mark at max for saying that...i.e. one chemical principle not demonstrated/or not shown by the student as knowing it blablabla...

but the rest as dumsum, areualrite, thunderdax et al have said is quite right in my opinion.
 
Joined
Nov 23, 2004
Messages
31
Location
somewhere over the rainbow ...
Gender
Female
HSC
2005
um if they wanted to ask a question on metal displacement reactions wouldn't they have asked it in the main body of the paper? The question was specifically for shipwrecks therefore questions would have to come from only the shipwrecks dot points.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
don;t base it on that. use some common sense and look at the diagram and think. would i be wrong to say that the iron would actually form on the magnesium?
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
We learnt that even though the reaction occurs in the same vessel it can still be an electron transfer reaction. My teacher was pretty awesome - she knew what she was talking about. Unless i had some kinda misunderstanding I'm almost certain it was a redox reaction. It would be hard to call it a certified galvanic cell because there's no external wire, but i'm sure its a redox reaction
 

Dumsum

has a large Member;
Joined
Aug 16, 2004
Messages
1,552
Location
Maroubra South
Gender
Male
HSC
2005
Captain Karl said:
We learnt that even though the reaction occurs in the same vessel it can still be an electron transfer reaction. My teacher was pretty awesome - she knew what she was talking about. Unless i had some kinda misunderstanding I'm almost certain it was a redox reaction. It would be hard to call it a certified galvanic cell because there's no external wire, but i'm sure its a redox reaction
Of course it's a redox reaction--Magnesium atoms are being oxidised and Iron ions are being reduced. Point is the iron nail has nothing to do with that.
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
I'm sure that the iron doesnt form on the magnesium. I'm also sure that you can come up with an argument to say that it will. I still believe that the iron will form on the nail and not on the magnesium or the bottom of the beaker
 

Dumsum

has a large Member;
Joined
Aug 16, 2004
Messages
1,552
Location
Maroubra South
Gender
Male
HSC
2005
Captain Karl said:
I'm sure that the iron doesnt form on the magnesium. I'm also sure that you can come up with an argument to say that it will. I still believe that the iron will form on the nail and not on the magnesium or the bottom of the beaker
What would happen if you removed the nail? So say if you just put magnesium in a solution of iron sulfate.
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
Point taken, but then its got nothing to do with the option topic. Still, the iron would form on the bottom of the beaker in that case and not on the magnesium strip
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
i don;t see why no though. it wouldn't make anything wrong.
 

gogogadgetbrain

New Member
Joined
Oct 28, 2004
Messages
22
Gender
Undisclosed
HSC
2008
Dumsum said:
What would happen if you removed the nail? So say if you just put magnesium in a solution of iron sulfate.
this thread and the other one (which is pretty much the same) are going in circles...i pretty much said the exact same thing in the other thread a couple of hours ago.

in summary if you're going to go against people like dumsum and myself you need to understand that electrons cannot float around in an electrolyte and therefore the iron ions will come out of solution on the magnesiums surface - as the magnesium is oxidised the iron that was attached to it will have nothing to 'hold' on to and will fall to the botttom of the beaker

i put down that the lead may undergo rusting- an independant process to the magnesium/iron ions redox reaction
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
gogogadgetbrain said:
this thread and the other one (which is pretty much the same) are going in circles...i pretty much said the exact same thing in the other thread a couple of hours ago.

in summary if you're going to go against people like dumsum and myself you need to understand that electrons cannot float around in an electrolyte and therefore the iron ions will come out of solution on the magnesiums surface - as the magnesium is oxidised the iron that was attached to it will have nothing to 'hold' on to and will fall to the botttom of the beaker

i put down that the lead may undergo rusting- an independant process to the magnesium/iron ions redox reaction
lol, so initially iron would basically form on the mg surface
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
To tell you the truth i'm starting to swing around to your way of thinking. The way I answered the question but i said that if you connected the two metals to a voltmeter you would get a reading, making it a proper cell. The I answered it made sense in the exam but then again so do a lot of answers that turn out to be wrong...
 

AreYouAlright?

Actuarial Co-op 2006
Joined
Sep 16, 2004
Messages
133
Gender
Male
HSC
2005
nosadness said:
would it record a voltage?

i don't think so.
I'm quite certain it would! If it was connected via external wire it would become a galvanic cell definitely!

I'd just like to point out that I have always had the same argument... NOT galvanic, formed on bottom of beaker! Nothing happens to Iron nail...

Debate what you will but the chemistry of it is quite clear.
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
If you connected the two metals to a voltmeter they would record a voltage (electrons would flow through the voltmeter from the magnesium to the iron, just not 100% of them). I'm not certain about the other parts but that i'm 100% on
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top